Bioresource Engineering Department Photograph Collection (P 106)

Inventory

NOTE: All negatives and large format color transparencies are stored 
separately at 2/3/8

(P shelves - Box 4)
Flax Photographs, 1938-1959 (Accession 96:031):
	[negatives are 5x7 unless noted otherwise and most prints are 
	5x7; negatives and color transparencies stored separately at 2/3/8]

Index cards
FX 1-7-38	BPI flax lab, Granger, Oregon (photo by W. M. Hurst; 
		negative and print)
FX 2-7-38	BPI flax lab, Granger, Oregon (photo by W. M. Hurst; 
		negative and 2 prints)

FX 3-7-38	Vessot flax puller on Nelson Gilmore's farm, Talbot, 
		Oregon (2 prints)
FX 4-7-38	Soenen's flax puller on Dave Turnagres farm, Talbot, 
		Oregon (photo by W. M. Hurst; negative and 4 prints)

FX 5-7-38	BPI flax lab, Granger, Oregon (photo by W. M. Hurst; 
		negative and 2 prints)

FX 6-7-38	[no negative or prints]

FX 7-7-38	BPI flax deseeder for plot work, Granger, Oregon (photo 
		by W. M. Hurst; negative and 3 prints)

FX 8-7-38	Truck power take-off binder for binding flax on drying 
		field, Springfield, Oregon (negative and 5 prints)

FX 9-7-38	Filling retting tank, Canby, Oregon (negative and 2 prints)
FX 10-7-38	Flushing retting tanks, Canby, Oregon (negative and 2 prints)
FX 11-7-38	Grates and timbers for holding flax under water for 
		retting (negative and 7 prints)
FX 12-7-38	Flax storage sheds with bales of tow at end of building, 
		Canby, Oregon (negative and 2 prints)

FX 13-7-38	Heavy timbers on grates for holding flax under water in 
		retting tanks, Springfield, Oregon (negative and 5 prints)

FX 14-7-38	De-seeding bundles of flax - BPI, Granger, Oregon; 
		rollers turn inward (negative and 3 prints)

FX 15-7-38	Filling retting tanks, Springfield, Oregon (photo by W. 
		M. Hurst; negative & 2 prints)
FX 16-7-38	Gravel pit used for retting water disposal, Springfield, 
		Oregon (negative & 2 prints)

FX 17-7-38	Scutching, deseeding and threshing shed, Canby, Oregon 
		(negative and 2 prints)

FX 18-8-38	Retting tanks, Springfield, Oregon (negative and 5 prints)

FX 19-8-38	Vessot flax puller on Arnold Melhum's farm (negative and 
		2 prints)
FX 20-8-38	Vessot flax puller in operation on Arnold Melhum's farm, 
		Canby, Oregon (photo by William M. Hurst; negative and 2 prints)
FX 21-8-38	Vessot flax puller on Arnold Melhum's farm, Canby, Oregon 
		(2 prints)

FX 22-8-38	Binding flax on drying field, Canby, Oregon (negative and 
		2 prints)
FX 23-8-38	Binding flax on drying field, Canby, Oregon (negative and 2 prints)
FX 24-8-34	Binding retted flax on drying field, Canby, Oregon 
		(negative and 2 prints)
FX 25-8-38	Binding retted flax straw on drying field, Canby, Oregon 
		(photo by W. m. Hurst; negative and 2 prints)
FX 26-9-38	Corn plant irrigated with retting water, Canby, Oregon 
		(photo by George Stafford; negative and 2 prints)
FX 27-9-38	Grass plot irrigated with retting water, Canby, Oregon 
		(photo by George Stafford; negative and 2 prints)
FX 28-9-38	Grass plots irrigated with retting water, Canby, Oregon 
		(photo by George Stafford; negative and 2 prints)
FX 29-3-39	Experimental tow shaker, Canby, Oregon (print only)
FX 30-3-39	Experimental tow shaker, Canby, Oregon (photo by W. M. 
		Hurst; negative and 4 prints)
FX 31-3-39	Experimental fiber flax deseeder, Canby, Oregon (photo by 
		W. M. Hurst; 3 prints)
FX 32-3-39	Experimental fiber flax deseeder on trailer (3 prints)

FX 33-6-39	Irrigated plots of flax, Granger, Oregon (photo by W. M. 
		Hurst; negative & 4 prints)
FX 34-6-39	Plots of flax, potatoes and corn irrigated with retting 
		water, Granger, Oregon (negative and 3 prints)
FX 35-6-39	Southeast end,  fiber flax lab and storage shed, Granger 
		farm, under construction (photo by W. M. Hurst; negative and 2 prints)
FX 36-6-39	Northwest end, fiber flax lab, storage shed, and boiler 
		room under construction, Granger, Oregon (photo by W. M. Hurst; negative 
		and 2 prints)
FX 37-6-39	Irrigated plots of flax, potatoes, and corn, Granger, 
		Oregon; retting water disposal experiments (negative and 2 prints)

FX 38-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (5 prints)
FX 39-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (negative & 2 prints)
FX 40-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 41-7-39	Vessot flax puller on M. Weinacht's farm (negative and 2 prints)
FX 42-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 43-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (photo by w. M. Hurst; negative and 2 prints)
FX 44-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (negative & 2 prints)
FX 45-7-39	Vessot flax puller on M. Weinacht's farm, Mt. Angel, 
		Oregon (negative and 5 prints)
FX 46-7-39	Soenens flax puller on Joe Bernt's farm, Mt. Angel, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 47-7-39	Flax straw storage shed (south), Mt. Angel, Oregon (photo 
		by W. M. Hurst; negative and 2 prints)
FX 48-7-39	Flax straw storage shed (north), Mt. Angel, Oregon 
		(negative and 2 prints)

FX 49-8-39	Soenens flax puller in field of flax and weeds, Lester 
		Burley's farm, Canby, Oregon (photo by George R. Stafford; negative 
		and 2 prints)
FX 50-8-39	Flax pulled by Soenens machine; note oats and dirt on 
		roots & rye grass standing (photo by George R. Stafford; negative 
		and 2 prints)

FX 51-8-39	Soenens flax puller on J. T. Bagard's farm, Springfield, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)

FX 52-8-39	Soenens flax puller location at Lester Burley's farm, 
		Canby, Oregon; note rough ground, rye grass, and other weeds in flax 
		(photo by George R. Stafford; negative and 2 prints)
FX 53-8-39	Flax field on Lester Burley's farm, Canby, Oregon, 
		showing difficult pulling conditions, weeds and rough ground (photo by 
		George R. Stafford; negative and 2 prints)

FX 54-9-39	Fiber flax lab, Granger, Oregon (negative and print)
FX 55-9-39	Straw storage shed and boiler room, flax lab, Granger, 
		Oregon (negative & 2 prints)
FX 56-9-39	Fiber flax lab and straw storage shed, Granger farm 
		(negative and print)
FX 57-9-39	Fiber flax drying field and lab, Granger, Oregon (3 prints)

FX 58-8-39	Soenen's deseeder installed at Mt. Angel, Oregon 
		(negative and 3 prints)

FX 59-8-39	Filling retting tank -- pitching bundles from wagon, 
		Canby, Oregon (photo by Walker; 6 prints)
FX 60-8-39	Filling retting tank, Canby, Oregon, by stacking bundles 
		in tank (photo by Walker; 2 prints)

FX 61-8-39	Filling retting tank, Springfield, Oregon, by stacking 
		bundles in tank (photo by Walker; 5 prints)
FX 62-8-39	Emptying retting tank with a loading elevator, 
		Springfield, Oregon (photo by Walker; 6 prints)
FX 63-8-39	Emptying retting tank and loading bundles on wagon, 
		Springfield, Oregon (photo by  Walker; 2 views -- 6 prints for each)

FX 64-8-39	Emptying retting tank; loading elevator in tank, Canby, 
		Oregon (photo by Walker; negative and 8 prints)
FX 65-8-39	Emptying retting tank and loading wagon, Canby, Oregon 
		(photo by Walker; negative and 3 prints)
FX 66-4-40	Experimental scutcher set up at Canby, Oregon (negative 
		and 2 prints)

FX 67-4-40	Experimental deseeder #2 discharge side, OSC campus 
		(photo by W. M. Hurst; negative and 2 prints)
FX 68-4-40	Experimental deseeder #2 feed side (negative and 2 prints)
FX 69-4-40	Experimental deseeder #2, end with threshing cylinder, 
		OSC (negative & 3 prints)
FX 70-4-40	Experimental deseeder #2, feed side showing clutch lever 
		(2 negatives & 2 prints)
FX 71-4-40	Massey Harris double band trusser, altered, showing 
		drives, OSC (photo by W. M. Hurst; negative and 3 prints)
FX 72-4-40	Massey Harris double band trusser, altered, showing 
		packers and tables, OSC  (negative and print)
FX 73-4-40	Massey Harris double band trusser, altered, showing load 
		platform, OSC (photo by W. M. Hurst; negative and 4 prints)

FX 74-4-40	Belgium tow shaker showing drier and metal pins (negative 
		and 2 prints)
FX 75-4-40	Belgium tow shaker showing hopper and cranks (negative 
		and 2 prints)

FX 76-6-40	Rebuilt Vessot puller from front (2 negatives and 2 prints)
FX 77-6-40	Vessot puller from side (2 negatives and 2 prints)

FX 78-6-40	Irrigation plots at Granger, Oregon; furrows of corn, 
		potatoes, flax, and grass watered with retting water (foreground) and 
		fresh water (background) (negative and 3 prints)
FX 79-6-40	Irrigation plots, Granger, Oregon; comparative height of 
		corn after 2-3" irrigation of retting and fresh water (negative and 2 prints)

FX 80-9-40	Experimental fly shuller loom with worp roll and heddle 
		strings (photo by W. M. Hurst; negative and 3 prints)
FX 81-9-40	Experimental fly shuller loom with sley and clack roll 
		(negative and print)

FX 82-11-40	Breaker-scutcher, feed end (negative and 2 prints)
FX 83-11-40	Breaker-scutcher, side view (?) and rotor in place for 
		tip ends of flax only; first unit and frame for second unit (photo by W. 
		M. Hurst; negative and 4 prints)
FX 84-11-40	Breaker-scutcher drive for tip end unit, showing conveyor 
		belt, roll, and swinging combs (photo by W. M. Hurst; negative and 4 prints)
FX 85-11-40	Scutcher, top and side view of one unit (negative and 2 prints)
FX 86-11-40	Scutcher; side and end view of one unit (negative and 2 prints)

FX 87-12-40	Hackling flax fiber from the scutcher (5 prints)
FX 88-12-40	Feeding fiber flax straw to breaker (2 prints)
FX 89-12-40	Hackling using coarse pegs (negative and 6 prints)
FX 90-12-40	Hackling using fine pegs [no negative or prints]

FX 91-12-40	Breaker-scutcher, discharge side and top view, with one 
		concave in place (negative and print)
FX 92-12-40	Deseeder #3, comb end and top view (photo by W. M. Hurst; 
		negative & 5 prints)
FX 93-12-40	Deseeder #3, root end and feed side (negative and 2 prints)
FX 94-12-40	Deseeder #3, discharge side showing comb and binder 
		drives (negative and 2 prints)
FX 95-2-41	Deseeder #2, entrance side, showing comb, and straw in 
		gripping device (negative and 3 prints)
FX 96-2-41	Deseeder #2, showing straw as fed from machine to binder 
		(negative and 6 prints)
FX 97-2-41	Deseeder #2; straw from deseeder to bundler to elevator 
		and to truck, Springfield, Oregon (photo by W. M. Hurst; negative and 5 
		prints)
FX 98-2-41	Deseeder #2, feed side with straw on table, Springfield, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 99-2-41	Deseeder #2, binder and elevator (negative and 3 prints)
FX 100-2-41	Deseeder #2 set up at Springfield, Oregon (negative and 3 prints)

FX 101-5-41	Frame and gear box on rebuilt Vessot flax puller 
		(negative and 2 prints)
FX 102-5-41	Frame for outside pulling assembly on rebuilt Vessot 
		(negative and 2 prints)
FX 103-8-41	Frame for outside pulling assembly showing large idlers 
		in cruler (on one side only) on rebuilt Vessot flax puller (negative and 
		2 prints)
FX 104-5-41	Rebuilt Vessot flax puller completely assembled (negative 
		and 2 prints)

FX 105-5-41	End view of one unit 1941 breaker-scutcher (photo by W. 
		M. Hurst; negative and 5 prints)
FX 106-5-41	Side view, 1941 breaker-scutcher unit with one rotor in 
		place (negative & 5 prints)

FX 107-4-41	Machine hackling, Salem Linen Mill (photo by John 
		Burtner; 2 prints)
FX 108-4-41	Automatic spreading line fiber  first step after machine 
		hackling, Salem Linen Mill (photo by John Burtner; 5 prints)
FX 109-4-41	Drawing flax fiber, Salem Linen Mill (photo by John 
		Burtner; 2 prints)
FX 110-4-41	Roving  these spools of coarse yarn are ready for 
		spinning, Salem Linen Mill (photo by John Burtner; 2 prints)
FX 111-4-41	Spinning yarn, Salem Linen Mill (photo by John Burtner; 2 prints)
FX 112-4-41	Carding tow; tow sliver can be seen to left of operator, 
		Salem Linen Mill (photo by John Burtner; 5 prints)
FX 113-4-41	Reeling, Salem Linen Mill (photo by John Burtner; 2 prints)

FX 114-5-41	Watchman's home, Clackamas Flax Growers Association, 
		Canby, Oregon (2 negatives and 3 prints)
FX 115-5-41	Scales and office building, Canby flax plant (2 negatives 
		and 2 prints)
FX 116-5-41	Flax straw storage shed under construction, Canby, Oregon 
		(photo by W. M. Hurst; negative & 3 prints)
FX 117-5-41	Foundation for fiber flax straw storage shed, Canby, 
		Oregon (negative & 3 prints)

FX 118-5-41	Reinforcement for retting tanks, St. Paul, Oregon 
		(negative and 2 prints)
FX 119-5-41	Reinforcement for battery of 8 retting tanks, St. Paul, 
		Oregon (negative & 2 prints)

FX 120-5-41	Buxbaum deseeder assembled and tested at Corvallis shop, 
		May 27, 1941 (photo by W. M. Hurst; negative and 2 prints)

FX 121-6-41	Irrigation ditch to be used for retting; dams will be 
		placed across to form individual "tanks" (negative and 3 prints)
FX 122-6-41	Interior of new flax straw storage shed under 
		construction, Canby, Oregon (negative and print)
FX 123-6-41	Retting water pond, Canby, Oregon; note abundant growth 
		of grass near water; flooding with this water will, however, kill crops 
		(negative and 2 prints)
FX 124-6-41	Oats and rye grass flooded with water from pond shown in 
		FX 123-6-41; all plants are in flooded area (negative and 2 prints)

FX 125-6-41	Flax straw storage sheds under construction, St. Paul, 
		Oregon (negative & 5 prints)
FX 126-6-41	Flax straw storage shed under construction, St. Paul, 
		Oregon (photo by W. M. Hurst; negative & 7 prints)

FX 127-6-41	Flax straw butter for deseeder, experimental (negative 
		and 3 prints)
FX 128-6-41	Experimental flax straw butter for deseeder in operation 
		(negative and 5 prints)

FX 129-7-41	Flax entering gripping device on a Soenens puller 
		(negative and 2 prints)
FX 130-7-41	Guides on dividers pulling wheels, Soenens puller 
		(negative and 5 prints)
FX 131-7-41	Soenens flax puller with experimental vertical binder 
		(negative and 2 prints)
FX 132-7-41	Soenens flax puller in operation on Morse farm near 
		Corvallis (photo by W. M. Hurst; negative and 6 prints)

FX 133-8-41	Binding retted flax straw on drying field, Canby, Oregon 
		(photo by W. M. Hurst; negative and 6 prints)
FX 134-8-41	Binding retted flax straw on drying field, Canby, Oregon 
		(negative and 2 prints)
FX 135-8-41	A load of pulled flax from the farm; stores; Canby, 
		Oregon (negative and 6 prints)
FX 136-8-41	Pulled flax stacked on drying field; crop in excess of 
		shed capacity, Canby, Oregon (negative and 2 prints)
FX 137-8-41	Pulled flax stacked in open because of lack of storage 
		shed capacity, Canby, Oregon (photo by W. M. Hurst; negative and 7 prints)
FX 138-8-41	Retted straw on drying field, Canby, Oregon (negative and 
		4 prints)
FX 139-8-41	"Wigwams" of retted straw on drying fields, Canby, Oregon 
		(negative and print)

FX 140-10-41	Retted straw binder, Harrisburg, Oregon (negative and 3 prints)
FX 141-10-41	Retted straw binder, Harrisburg, Oregon (negative and 2 prints)
FX 142-10-41	Retted straw binder, Harrisburg, Oregon (negative and 3 prints)
FX 143-10-41	Scales, deseeding shed, scutching building and one shed, 
		Harrisburg, Oregon (negative and 3 prints)

FX 144-11-41	Semi-automatic loom with foot operated heddles (photo by 
		W. M. Hurst; negative and 2 prints)
FX 145-11-41	Semi-automatic loom with foot operated heddles, altered 
		(negative and 2 prints)

FX 146-12-41	Corvallis #4 scutcher under construction (negative and 2 prints)
FX 147-12-41	Corvallis #4 scutcher under construction (negative and 2 prints)
FX 148-12-41	Corvallis #4 scutcher under construction showing breaker 
		(negative and print)
FX 149-12-41	Corvallis #4 scutcher under construction showing rotors 
		(negative and 2 prints)

FX 150-3-42	Corvallis breaker scutcher #1 with V-belt gripping and 
		conveyor device (negative and 2 prints)
FX 151-3-42	Transfer on Corvallis #1 breaker-scutcher (photo by W. M. 
		Hurst; negative and 3 prints)
FX 152-3-42	Take-off on Corvallis #1 breaker-scutcher (negative and 3 prints)

FX 153-5-42	Tow cleaver with reciprocatory breakers, OSC (photo by W. 
		M. Hurst; negative and 6 prints)
FX 154-5-42	Pipe edge slats on tow shaker used with tow cleaver 
		(negative and 3 prints)
FX 155-5-42	Fiber flax combine; A. C. combine, Soenens puller and 
		John Deere binding units (negative and 3 prints)
FX 156-5-42	Fiber flax combine showing rubber crushing rollers for 
		deseeding, feed table to binder and double needle binding unit (negative 
		and 2 prints)

FX 157-5-42	N. W. Flax Products Co. under construction, left to 
		right: office and warehouse, scutching building, boiler room and fuel 
		storage (negative and 2 prints)
FX 158-5-42	N. W. Flax Products Co. mill under construction, left to 
		right: garage, office and warehouse, and scutching building (negative and 
		4 prints)
FX 159-5-42	N. W. Flax Products Co. mill under construction, left to 
		right:  office and warehouse, garage, and scutching building (negative 
		and 2 prints)
FX 160-5-42	Abutments out walls of 6 retting tanks, N. W. Flax 
		Products Co.; forms for a bailery of 6 more tanks to right (negative and 
		2 prints)
FX 161-6-42	Deseeding building under construction, N. W. Flax 
		Products Co., Eugene, Oregon (negative and 5 prints)
FX 162-6-42	Interior of scutching building under construction, N. W. 
		Flax Products Co., Eugene, Oregon (negative and 4 prints)
FX 163-6-42	South end and east side of 56'x288'x20' (plate) straw 
		storage shed, N. W. Flax Products Co., Eugene, Oregon (negative and 3 prints)
FX 164-6-42	South end of 56'x288'x20' (plate) straw storage shed; 
		showing one of several elevators under construction to left; N. W. Flax 
		Products Co., Eugene, Oregon (negative and 4 prints)
FX 165-6-42	Interior of straw storage shed, N. W. Flax Products Co., 
		Eugene, Oregon; note braces and cat walk (negative and 2 prints)
FX 166-6-42	Bailery of 6 tanks, top second bailery of 6 to right 
		under construction, N. W. Flax Products Co., Eugene, Oregon; note 
		abutments and common trought for discharge of retting water (negative and 
		3 prints)

FX 167-6-42	Lower end of bailery of 12--23'x104'x4' tanks formed in 
		irrigation ditch, Flax Growers Association, Harrisburg, Oregon (negative 
		and 3 prints)
FX 168-6-42	Harrisburg Flax Growers Association flax mill, left to 
		right:  (2 in sight and 1 hidden from view) scutching bulding, deseeding 
		shed, office, and 12 tank formed in irrigation ditch (negative and 2 prints)
	
FX 169-8-42	Fiber flax combine on Mr. Ivers farm south of Corvallis 
		(negative and print)

FX 170-8-42	Byberg built Soenens flax puller, rear view (negative and 
		5 prints)
FX 171-8-42	Byberg built Soenens flax puller, front view (negative 
		and 7 prints)

FX 172-8-42	Sheds and deseeding building under construction, Molalla 
		Flax Growers, Molalla, Oregon (view 1: negative and 4 prints; view 2: 
		negative and print)

FX 173-8-42	Fiber flax combine in operation on Burres farm (negative 
		and 2 prints)
FX 174-8-42	Pulled flax straw moving from pulling units to deseeder 
		on fiber flax combine (negative and 3 prints)
FX 175-8-42	Binding straw and sacking seed on fiber flax combine (2 
		negatives and 3 prints)
FX 176-8-42	Feeding binder on fiber flax combine (negative and 6 prints)
FX 177-8-42	Fiber flax combine in action on Burres farm (negative and 
		2 prints)
FX 178-8-42	Pulling units on fiber flax combine (negative and 2 prints)
FX 179-8-42	Seed in bag and bundles ready for retting tanks with 
		fiber flax combine (negative and 3 prints)

FX 180-3-43	Automatic wiper for deseeder comb, deseeder Corvallis #8 
		(negative and 3 prints)
FX 181-3-43	Drive assembly and automatic wiper for deseeder Corvallis 
		#8 (negative and 2 prints)

FX 182-6-43	Tow shakers and reciprocating flax tow brake for cleaving 
		tow; two of these machines are used in tandem; Corvallis #7 (2 negatives 
		and 5 prints)
FX 183-6-43	Tow cleaver Corvallis #7 showing used automobile ball 
		bearings mounted in board for shakers (negative and 3 prints)
FX 184-6-43	Tow cleaver Corvallis #7 shaker and breaker drive (2 
		negatives and 2 prints)

FX 185-7-43	Self propelled flax puller with pneumatic gripping 
		device; machine known as "scooter" as it operated at 5-7 miles per hour 
		(negative and 2 prints)
FX 186-7-43	Side view of pneumatic gripping device on scooter 
		(negative and 2 prints)
FX 187-8-43	Scooter pulling flax on Clyde Walker farm (negative and 5 prints)
FX 188-8-43	Rear view of scooter in operation on Clyde Walker farm (2 
		negatives and 2 prints)

FX 189-8-43	Fiber flax combine equipped with automatic feed for straw 
		to binder (negative and 2 prints)
FX 190-8-43	Finger in position to stop flow of deseeded straw to 
		binder on combine; pressure of straw against finger trips binder 
		(negative and 2 prints)
FX 191-8-43	A tractor mounted puller that did not work; the machine 
		pulled the flax out of the ground, but straw tangled over small gripping 
		belts pulleys over pneumatic tires (negative and 4 prints)

FX 192-8-43	Office and deseeding buildings, N. W. Flax Products Co. 
		(negative and 3 prints)
FX 193-8-43	Office, shed with elevators, garage, and new shed under 
		construction, N. W. Flax Products Co. (negative and 3 prints)
FX 194-8-43	Drying field with mill in background, N. W. Flax Products 
		Co., (negative and 3 prints)
FX 195-8-43	Open ditch to waste land for retting water disposal, N. 
		W. Flax Products Co., (negative and 3 prints)
FX 196-8-43	Retting water open ditch to waste land-trees and 
		brush-for disposal, Northwest mill (negative and 2 prints)

FX 197-9-43	Tractor attached flax puller with pneumatic gripping 
		device (experimental) at a farm near Corvallis, Oregon (photo by W. M. 
		Hurst; negative and 5 prints)
FX 198-9-43	Tractor attached flax puller with pneumatic gripping 
		device showing coslor wheel in rear (negative and 2 prints)

FX 199-9-43	Retting water disposal area in waste swamp land, Benton 
		Co. Mill (negative and 3 prints)
FX 200-9-43	Straw storage shed with elevators, Benton County Mill 
		(negative and 2 prints)
FX 201-9-43	Benton County Flax Mill as viewed from west side of 
		Southern Pacific tracks (negative and 3 prints)
FX 202-9-43	Benton County Flax Mill with retting straw on drying 
		field in foreground (7 prints)
FX 203-9-43	Benton County Flax Mill as viewed from approach from the 
		south on highway 99W (negative and print)
FX 204-9-43	Retting tanks with shop in background, Benton Co. Mill 
		(negative and 2 prints)
FX 205-9-43	A straw storage shed with elevators Benton County Mill 
		(negative and print)
FX 206-9-43	Retting tanks with office and warehouse, and one shed in 
		background, Benton Co. Mill (negative and 10 prints)
FX 207-9-43	Benton County Flax Mill as viewed from south near highway 
		(negative and print)
FX 208-9-43	Fuel storage shed, boiler room and retting tanks, Benton 
		Co. Mill (negative and 2 prints)
FX 209-9-43	Private office, Benton County Mill (negative and print)

FX 210-9-43	Molalla Flax Growers Mill, left to right: shed, office, 
		and deseeding building (negative and 2 prints)
FX 211-9-43	Molalla Flax Growers shed, west end and south sides 
		(negative & 2 prints)
FX 212-9-43	Molalla Flax Mill as viewed from approach from west, left 
		to right: office, watchman's residence, boiler room, scutching building, 
		and sheds (negative and 3 prints)
FX 213-9-43	Molalla Flax Mill, left to right: tanks, fuel storage, 
		office, scutching building and corner of deseeding building; negative and 
		3 prints)

FX 214-9-43	Straw storage shed under construction, Washington Co. 
		Flax Growers (negative and 2 prints)

FX 215-9-43	Retting tanks, deseeding building and sheds under 
		construction, Washington Co. Flax Growers (negative and print)
FX 216-9-43	Retting tanks with office and one shed in background, 
		Washington County Flax Growers, Cornelius, Oregon (negative and print)
FX 217-9-43	Straw storage shed with elevators, Washington Co. Flax 
		Growers (negative and print)

FX 218-9-43	Approach to Benton County Flax Growers Mill (negative and 
		2 prints)
FX 219-4-43	Sheds, Benton County Flax Growers Mill as seen from north 
		on highway 99W (negative and 2 prints)
FX 220-9-43	Experimental retted straw leveler or evener (negative and 
		3 prints)

FX 221-2-44	Pneumatic gripping device on tractor type flax puller 
		(negative and 2 prints)
FX 222-2-44	Rear view of tractor trailer type flax puller with binder 
		platform and shields removed (negative and 3 prints)
FX 223-2-44	Tractor trailer type flax puller with binder table and 
		shields removed (negative and 3 prints)
FX 224-2-44	Double band binder on 45  deseeder (negative and 2 prints)

FX 225-9-44	Front end of experimental field binder and loader for 
		retted straw, Benton County Mill (negative and 2 prints)
FX 226-9-44	Tripping binder with foot on experimental retted straw 
		binder and loader; Benton County Mill (photo by W. M. Hurst; negative and 
		3 prints)
FX 227-9-44	Side view of experimental retted straw binder and loader 
		showing drives for binder and elevator (negative and 7 prints)
FX 228-9-44	Feeding straw to drying field binder and loader, Benton 
		County Mill (photo by W. M. Hurst; negative and 2 prints)
FX 229-9-44	Binding unit of type commonly used for binding bundles of 
		ruled straw, Benton County Mill (negative and 8 prints)

FX 230-9-44	Experimental pneumatic gripping device for flax puller 
		mounted on tractor for harvesting plots, Granger, Oregon (photo by E. G. 
		Nelson; 6 prints)
FX 231-9-44	Opening field of experimental plots fiber flax with 
		pneumatic tire pulling unit mounted on tractor, Granger, Oregon (photo by 
		E. G. Nelson; 2 views: 14 prints)

FX 232-9-44	Rear view of fiber flax combine (4 prints)
FX 233-9-44	Side view of fiber flax combine (4 prints)

FX 234-8-42	Bernard flax puller, St. Paul, Oregon (photo by E. G. 
		Nelson; negative & 3 prints)

FX 235-5-45	Breaker scutcher set up in shop for tests, Corvallis, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 236-5-45	Front end of first unit of breaker scutcher showing slot 
		opening for flax to enter and V belt of gripping device (negative and 3 
		prints)
FX 237-5-45	Throat into which flax straw is fed; hardwood block holds 
		side wings of gripping chain open so as to straddle V belt, Corvallis, 
		Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 238-5-45	Feed table and gripping device for first unit of breaker 
		scutcher, Corvallis, Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 239-5-45	Drive for gripping device and transfer on breaker 
		scutcher, Corvallis, Oregon (photo by W. M. Hurst; negative and 2 prints)
FX 240-5-45	Discharge end, or "take off" of second unit of breaker 
		scutcher (negative and 3 prints)
FX 241-5-45	Fiber at "take off" end of second unit of breaker 
		scutcher (negative and 2 prints)
FX 242-5-45	Main drive for breaker and scutching rotors on second 
		unit of breaker-scutcher (negative and 3 prints)
FX 243-5-45	Vacuum tow box on down draft tow system for scutcher with 
		rubber rollers for removing tow from dead air space, Corvallis, Oregon 
		(photo by W. M. Hurst; negative and 3 prints)
FX 244-5-45	Curved spring steel rods in tow box to deflect tow into 
		dead air space; down draft tow system on scutcher, Corvallis, Oregon 
		(photo by W. M. Hurst; negative and 2 prints)

FX 245-3-45	Van Hauwaert scutcher at N. W. Flax Products Co. Mill 
		showing feed table, breaker, tip end unit, butt end unit, and dust 
		exhaust system (negative & 8 prints)

FX 246-3-46	Experimental scutcher at Benton Co. Flax Mill, showing 
		feed table, tip end unit, butt end unit, and gripping device (negative 
		and 9 prints)
FX 247-3-46	Experimental scutcher at Benton Co. Flax Mill, take off 
		end (negative & 4 prints)
FX 248-3-46	Experimental scutcher at Benton Co. Flax Mill; take off 
		end showing beater blades and combs (6 prints)

FX 249-3-46	Van Hauwaert scutcher at N. W. Flax Products Co. Mill, 
		take off end (negative and 5 prints)
FX 250-3-46	Van Hauwaert scutcher at N. W. Flax Products Co. Mill, 
		take off end (2 views: negative & 6 prints for 1st view; 2 prints for 2nd 
		view)

FX 251-3-46	Flax display board (3 views: 1 negative; several prints 
		for each view)

FX 252-4-46	Flax bundles before and after butting in flax butting 
		machine at Benton County Mill (negative and 3 prints)
FX 253-4-46	Flax bundles before and after butting in flax butting 
		machine at Benton County Mill; Joe Hubbard holding bundles (negative and 
		4 prints; 3 prints originally numbered FX-255-4-46)

FX 254 & 255 	[no images with these numbers]

FX 256-4-46	Lift for retting tank at N. W. Flax Products Co. 
		(negative and print)
FX 257		[no image with this number]

FX 258-4-46	Close up of one end of scutcher blades showing combs 
		(negative and 4 prints)
FX 259-4-46	Samples of scutched fiber   right: before installation of 
		combs; left: after installation of combs (2 negatives and 8 prints)

FX 260-4-46	Flax bundle prior to butting on the vibrator type butter 
		(2 negatives and 3 prints)
FX 261-4-46	One bundle of flax on the experimental vibrator type 
		butter; butted for two minutes (2 negatives and 2 prints)
FX 262-4-46	Flax bundle after butting for 2 minutes on vibrator type 
		butter (negative and 2 prints)

FX 263-6-46	Retting tank top lift  lid down, NW Flax Products Co., 
		Eugene, Oregon (photo by C. I. Branton; negative and 6 prints)
FX 264-6-46	Lifting device attached to closed retting tank lid, NW 
		Flax Products Co., Eugene, Oregon (photo by C. I. Branton; negative and 3 
		prints)

FX 265-6-46	Bucket butter and butted bundle, Benton Co. Flax Growers 
		Mill (photo by C. I. Branton; negative and 9 prints)
FX 266-6-46	Bucket butter operating, Benton Co. Flax Growers Mill 
		(photo by C. I. Branton; negative and 5 prints)

FX 267-6-46	Open type retting tank lid lifted for movement, NW Flax 
		Products Co. (photo by C. I. Branton; negative and 2 prints)
FX 268-6-46	Retting tank lid raised for movement, NW Flax Products 
		Co. (photo by C. I. Branton; negative and 3 prints)
FX 269-6-46	Retting tank lid, closed type, NW Flax Products Co. 
		(photo by C. I. Branton;  negative and print)
FX 270-6-46	Conventional type slatted retting tank top; automatic 
		temperature control in foreground,  NW Flax Products Co. (photo by C. I. 
		Branton; negative & 2 prints)
FX 271-6-46	Conventional type slatted retting tank top with 
		mechanical lift in use (4 prints)
FX 272-7-46	Retting operations at N. W. Flax Products, Eugene, Oregon 
		(negative & 3 prints)
FX 273-7-46	Handling retted straw, N. W. Flax Products, Eugene, 
		Oregon (negative & 2 prints)
FX 274-7-46	Retting tanks and field drying, N. W. Flax Products, 
		Eugene, Oregon (negative and 2 prints)
FX 275-7-46	Retting tanks and field drying, N. W. Flax Products, 
		Eugene, Oregon (negative and 3 prints)
FX 276-7-46	Retting tank studies, N. W. Flax Products, Eugene, Oregon 
		(negative and 7 prints)
FX 277-7-46	Retting tank studies, instruments and automatic controls 
		(negative and 5 prints)
FX 278-7-46	Retting tank studies, instruments and automatic controls 
		(negative and 4 prints)

FX 279-7-46	Retting and field drying at Benton County plant (negative 
		and 3 prints)

FX 280-7-46	Construction details of straw spreader (negative and 4 prints)
FX 281-7-46	Construction details of straw spreader (negative and 2 prints)
FX 282-7-46	Construction details of straw spreader (negative and 2 prints)

(P shelves - box 5)
FX 283-7-46	Construction details of straw separator and double needle 
		binder (negative and 2 prints)
FX 284-7-46	Construction details of straw separator and double needle 
		binder (negative and 2 prints)

FX 285-7-46	Puller equipped with straw spreader and double needle 
		binder, OSC campus (negative and 3 prints)
FX 286-7-46	Puller equipped with straw spreader and double needle 
		binder, OSC campus (negative and 2 prints)
FX 287-7-46	Puller, front view, OSC campus (negative and 5 prints)

FX 288-7-46	Pulling flax on the Gregg farm, double needle binder and 
		straw separator (negative and 7 prints)
FX 289-7-46	Pulling flax on the Gregg farm, double needle binder and 
		straw separator (negative and 4 prints)
FX 290-7-46	Pulling flax on the Gregg farm, double needle binder and 
		straw separator  (negative and print)
FX 291-7-46	Single tie bundle and double tie bundle, Gregg farm 
		(negative and 2 prints)
FX 292-7-46	Byberg type puller with single binder, Gregg farm 
		(negative and 5 prints)

FX 293-9-46	Heating plant, N. W. Products Co. (negative and 3 prints)

FX 294-9-46	Field binder loader (negative and 6 prints)
FX 295-9-46	Field binder loader with bundle elevator (experimental) 
		(negative and 4 prints)

FX 296-9-46	Mt. Angel flax festival, F. Schwab (on horse?) (negative 
		and 3 prints)
FX 297-9-46	Mt. Angel flax festival parade (negative and 3 prints)
FX 298-9-46	Mt. Angel flax festival, Flax Plant float (negative and 2 prints)

FX 299-8-46	Field binder, wheel barrow type (negative and 4 prints)
FX 300-8-46	Field binder, wheel barrow type (negative and 3 prints)
FX 301-8-46	Field binder, wheel barrow type (negative and 2 prints)

FX 302-9-46	Vessot pulled field near Mt. Angel, Oregon (negative and 
		5 prints)
FX 303-9-46	Vessot pulled field near Mt. Angel, Oregon (negative and 
		6 prints)

FX 304-10-46	Straw separator and stop-binder and conveyor on deseeder 
		at Mt. Angel, Oregon (negative and 2 prints)
FX 305-10-46	Straw separator and stop-binder and conveyor on deseeder 
		at Mt. Angel, Oregon, with observers (negative and 2 prints)

FX 306-7-46	Gregg Farm, Soenens puller (negative and 3 prints)

FX 307-10-46	Tow machine, Benton Co. (2 negatives and 2 prints)

FX 308-10-46	Laboratory retting; Dr. Walter Bollen (negative and 6 prints)

FX 309-10-46	Haas Drier (German) with Hydro-extractor (negative and 3 prints)
FX 310-10-46	Haas Drier (German) (negative and 3 prints)

FX 311-10-46	Oregon City puller (negative and 6 prints)

FX 312-10-46	Whipping rolls in operation (2 views: negative and 6 prints)
FX 313-10-46	Tying bundles from whipping rolls (negative and 6 prints)

FX 314-11-46	Hand hackling, coarse combs (negative and print)
FX 315-11-46	Hand hackling, fine combs (negative and 2 prints)
FX 316-11-46	Hand hackling, tipps and butts (negative and 4 prints)
FX 317-11-46	Hand hackling, grading (negative and 4 prints)

FX 318-11-46	Deseeding at Washington County plant (negative and 7 prints)
FX 319-11-46	Inclined feed table, Washington County (negative and print)
FX 320-11-46	Inclined feed table, Washington Co., showing vibrator 
		butter mechanism (negative and 2 prints)
FX 321-11-46	Inclined feed table, Washington Co., showing conveying 
		pins (negative 4 prints)
FX 322-11-46	Inclined feed table, Washington Co., drive mechanism 
		(negative and 2 prints)

FX 323-11-46	Scutching at Benton Co., Delano; conventional scutcher 
		feed table showing 6 people, 5 of whom could be replaced with the 
		mechanical string cutter, straw spreader and the butter feed table 
		(negative and 4 prints)
FX 324-11-46	Combs on experimental scutcher, Benton County Mill 
		(negative and 2 prints)
FX 325-12-46	Feeding the scutcher at Benton Co. Flax Mill (negative 
		and 7 prints)
FX 326-12-46	Feeding the scutcher at Benton Co. Flax Mill (negative 
		and 8 prints)

FX 327-12-46	Stationary bans in experimental breaker, showing taper 
		(negative and 2 prints)
FX 328-12-46	Assembling experimental scutcher at Benton County Mill 
		(negative and 2 prints)
FX 329-12-46	Experimental scutcher at Benton County prior to assembly 
		(negative and 6 prints)

FX 330-12-46	German flax washer and roll Hydroextractor (negative and print)

FX 331-1-47	Dust enclosure around Van Hauwaert scutcher at Benton 
		County (negative and 8 prints)
FX 332-1-47	Van Hauwaert scutcher at Benton Co. Mill with down draft 
		dust removal (negative and 7 prints)
FX 333-1-47	Tow machine at Benton Co. in operation (negative and 9 prints)

FX 334-3-47	Beetling, scutching and hackling flax (from an engraving) 
		(negative and print)

FX 335-4-47	Tow machine and drier at Benton County (negative and 2 prints)

FX 336-4-47	Experimental retting at bacteriology lab at OSC; Bollen 
		and Lambrecht (negative and 4 prints)
FX 337-4-47	Bacteria colonies, anaerobic and aerobic oxygen (negative 
		and 3 prints)

FX 338-4-47	Retting tank studies chart, 1946-R1 (negative and 5 prints)
FX 339-4-47	Retting tank studies chart, 1946-R2 (negative and 3 prints)
FX 340-4-47	Retting tank studies chart, 1946-R3 (negative and 3 prints)

FX 341-6-47	Field binder loader, construction details (negative and 8 prints)
FX 342-6-47	Field binder loader, construction details (negative and 2 prints)
FX 343-6-47	Field binder loader, construction details (negative and 4 prints)
FX 344-6-47	Field binder loader, construction details (negative and 2 prints)

FX 345-8-47	Van Hauwaert scutcher during installation, Santiam Mill, 
		Jefferson, Oregon (negative and 10 prints)
FX 346-8-47	Scutcher building and tow processing building, Santiam 
		Mill, Jefferson, Oregon (2 negatives and 10 prints)

FX 347-8-47	Retting tank, top lift, Canby, Oregon (negative and 3 prints)
FX 348-8-47	Field binding operation, Canby, Oregon (negative and 7 prints)

FX 349-8-47	Santiam scutcher building; negative and 2 prints.

FX 350-9-47	Straw separator stop, construction detail "A" (negative 
		and 2 prints)
FX 351-9-47	Straw separator stop, construction detail "B" (negative 
		and 2 prints)
FX 352-9-47	Straw separator stop, construction detail "C" (negative 
		and 3 prints)
FX 353-9-47	Straw separator stop, construction detail "D" (negative 
		and 4 prints)
FX 354-9-47	Straw separator stop, construction detail "E" (negative 
		and 2 prints)

FX 355-2-48	Wigwam pick up, construction details "A" (negative and print)
FX 356-2-48	Wigwam pick up, construction details "B" (negative and 3 prints)
FX 357-2-48	Wigwam pick up, construction details "C" (negative and 2 prints)
FX 358-2-48	Wigwam pick up, construction details "D" (negative and 6 prints)

FX 359-2-48	Inclined feed table vs. flat table, Washington Co. "A" 
		(negative and print)
FX 360-2-48	Inclined feed table vs. flat table, Washington Co. "B" 
		(negative and 2 prints)

FX 361-4-48	Tow drying study (charts); figures 1, 2, and 3 (3 
		negatives and 6 prints)
FX 362-4-48	Tow drying study (charts); figures 4, 5, and 6 (3 
		negatives and 6 prints)
FX 363-4-48	Canby retting report (charts); figures 3, 4, and 5 (3 
		negatives & 12 prints)

FX 364-6-48	Flax stem and flower (reproduced from book) (negative and 
		2 prints)
FX 365-6-48	Flax stem anatomy, cross section (reproduced from book) 
		(negative and 2 prints)
FX 366-6-48	Ultimate flax fibers (reproduced from book) (negative and 
		2 prints)
FX 367-6-48	Chemical composition of dried flax straw (reproduced from 
		book) (negative and 2 prints)

FX 368-8-48	Experimental flax drier, Welch (negative and print)
FX 369-8-48	Experimental flax drier, kiln open (negative and 10 prints)

FX 370-8-48	Flax deseeder, front view (9 prints)
FX 371-8-48	Flax deseeder, angle view (negative and 7 prints)

FX 372-8-48	Elevating into storage shed, St. Paul, Oregon (negative 
		and 4 prints)

FX 373-8-48	Willamette puller, showing tractor (negative and 4 prints)
FX 374-8-48	Willamette puller, side view (negative and 8 prints)
FX 375-8-48	Willamette puller, front view (negative and 3 prints)

FX 376-8-48	Experimental flax drier   Branton (negative and 5 prints)
FX 377-8-48	Deseeder with string cutter, butter, and binder (negative 
		and 4 prints)
FX 378-8-48	Experimental flax drier, kiln closed (negative and 10 prints)

FX 379-7-48	Field binder loader with wigwam pick up, front view 
		(negative and 8 prints)
FX 380-7-48	Field binder loader with wigwam pick up, side view 
		(negative and 3 prints)

FX 381-9-48	Fiber flax shop, west to east (negative and 2 prints)
FX 382-9-48	Fiber flax shop, drill press in foreground (negative and 
		3 prints)

FX 383-9-48	Mt. Angel Flax Growers Assn. float with committee 
		(negative and 4 prints)
FX 384-9-48	Fred Schwab on horse, Mt. Angel flax parade (negative and 
		3 prints)

FX 385-9-48	Tow drier and feeder at Santiam Flax Plant (negative and 
		8 prints)
FX 386-9-48	Bale opening tow feeder, Santiam Flax Plant (negative and 
		7 prints)

FX 387-11-48	1948 maturity study  wax (negative and 2 prints)

FX 388-8-48	Cucumber harvester, side view (negative and 4 prints)
FX 389-8-48	Cucumber harvester, back view (negative and 3 prints)

FX 390-11-48	1948 wax maturity, plot picture (negative and print)

FX 391-3-49	Experimental scutcher, feed table, Mt. Angel, Oregon 
		(negative and 6 prints)
FX 392-3-49	Experimental scutcher, turbines, Mt. Angel, Oregon (3 prints)
FX 393-3-49	Experimental scutcher, fiber take off, Mt. Angel, Oregon 
		(negative and 2 prints)

FX 394-3-49	Green tow machine, Santiam Mill, output end (negative and 
		5 prints)
FX 395-3-49	Green tow machine, Santiam Mill, feed end (negative and 8 prints)
FX 396-3-49	Green tow machine, Santiam Mill, feet end, no operators 
		(negative and 6 prints)

FX 397-8-49	Double and single string, natural drying and temperature 
		study (negative and 5 prints)

FX 398-8-49	Close-up of flax puller with flax, front view (negative 
		and 7 prints)
FX 399-8-49	Angle view of flax puller with flax (2 negatives and 8 prints)
FX 400-8-49	Side view of flax puller with flax and showing binder 
		(negative and 5 prints)
FX 401-8-49	Flax puller without flax, front view (negative and 3 prints)

FX 402-8-49	Field binder-loader at Molalla Flax Plant, shady side 
		(negative only)
FX 403-8-49	Mobile field binder loader with bundle elevator and 
		bundle pick up attachment (experimental) at Molalla Flax Plant, sunny 
		side (4 prints)

FX 404-8-49	Front view of Scott Strength Test (2 negatives and 9 prints)
FX 405-8-49	A. E. Pulp balance with equilibrium samples (2 negatives 
		and 2 prints)
FX 406-8-49	Table of exponentials (chart) (negative and 9 prints)
FX 407-8-49	Potentiometer (negative and 7 prints)
FX 408-8-49	Equipment used in equilibrium and regain test (negative 
		and 9 prints)

FX 409-11-49	Van Hauwaert 4-turbine type scutcher, Dominion 
		Experimental Farm, Ottowa, Canada (print)

FX 410-9-50	Self-propelled field binder loader with pick up 
		attachment operating at Mt. Angel Flax Plant, revised model (negative and 
		5 prints)
FX 411-9-50	Self-propelled field binder loader with pick up 
		attachment operating at Mt. Angel Flax Plant, revised model (negative and 
		4 prints)
FX 412-9-50	Self-propelled field binder loader with pick up 
		attachment operating at Mt. Angel Flax Plant, revised model (negative and 
		4 prints)
FX 413-9-50	Self-propelled field binder loader with pick up 
		attachment operating at Mt. Angel Flax Plant, revised model (negative and 
		5 prints)

FX 414-11-50	Santiam Flax Plant, view showing several buildings 
		(negative and 5 prints)
FX 415-11-50	Santiam Flax Plant, Jefferson, Oregon, view from entrance 
		showing most buildings (negative and 3 prints)
FX 416-11-50	Santiam Flax Plant, Jefferson, Oregon, view showing 
		scutcher buildings, left, and tow buildings, right (negative and 5 prints)
FX 417-11-50	USDA designed tow dryer on right and tow scutcher on left 
		at Santiam Flax Plant (negative only)
FX 418-11-50	Operating Van Hauwaert scutcher at Santiam Flax Plant 
		(negative and 13 prints)
FX 419-11-50	Operating USDA experimental scutcher at Santiam Flax 
		Plant (negative and print)
FX 420-11-50	Tow separator box operating with experimental scutcher at 
		Santiam Flax Plant (negative and 7 prints)
FX 421-51	Bulk handling; unloading farmer's flax, Santiam Flax 
		Plant (negative and 7 prints)
FX 422-51	Bulk handling; unloading farmer's flax, Santiam Flax 
		Plant (negative and 4 prints)
FX 423-8-51	Bulk handling; unloading farmer's flax, Santiam Flax 
		Plant (5x7 color transparency and color print)

FX 424-8-51	Pulled flax drying in field; flat bundles are to be 
		stacked as shown on right; (5x7 color transparency and color print)
FX 425-8-51	Flax puller, Chapin commercial variety test plots (2 
		color prints)

FX 426-51	Pitch fork handling; loading retted straw for scutcher, 
		Santiam Flax Plant (negative and 3 prints)
FX 427-51	Pitch fork handling; loading retted straw for scutcher, 
		Santiam Flax Plant (negative and 5 prints)
FX 428-51	Pitch fork handling; loading retted straw for scutcher, 
		Santiam Flax Plant (negative and 6 prints)
FX 429-51	Pitch fork handling; loading retted straw for scutcher, 
		Santiam Flax Plant (negative and 6 prints)

FX 430-52	Van Hauwaert four drum scutching machine, Model 1949 
		(print only)

FX 431-3-52	Horizontal bundle string cutter (print only)
FX 432-3-52	Retted straw straightener; feed in side, bundle on table 
		(negative and 5 prints)
FX 433-3-52	Retted straw straightener; feed in side, straw in machine 
		(negative and 6 prints)
FX 434-3-52	Retted straw straightener and spreader, outlet side (2 prints)
FX 435-3-52	Retted straw spreader at outlet of straw straightener, no 
		straw (negative and 6 prints)
FX 436-3-52	Retted straw spreader at outlet of straw straightener, 
		straw in machine (negative and 4 prints)

FX 437-6-52	Linen and wool display, Oregon State Capitol (4x5 
		negative and 7 prints)
FX 438-6-52	Linen and wool display, Oregon State Capitol (4x5 
		negative and 7 prints)
FX 439-6-52	Gov. Douglas McKay at linen and wool display, Oregon 
		State Capitol (2 views: 4x5 negative and print; print only)

FX 440-9-52	Two bundles of pulled flax in pulling field -- 1-single 
		tied-Soenens puller, 1- double tied-USDA experimental puller (negative 
		and 3 prints)
FX 441-9-52	Two shocks of pulled flax bundles in pulling field -- 
		1-single tied bundles- Soenens puller, 1-double tied bundles-USDA 
		experimental puller (negative and 3 prints)
	
FX 442-12-52	Front view of lift truck with pullet load of flax 
		(negative and print)
FX 443-12-52	Rear view of lift truck with pallet load of flax 
		(negative and 2 prints)
FX 444-12-52	Side view of lift truck with pallet load of flax 
		(negative and 2 prints)
FX 445-12-52	Pallet load of flax on ground (negative and print)

FX 446-1-53	Two bundles of pulled flax -- 1. left-commercial pulled; 
		2. right-USDA self- propelled pulled (negative and 3 prints)
FX 447-1-53	Four bundles of pulled flax -- 1. left-2 bundles 
		commercial pulled; 2. right-2 bundles USDA self propelled puller pulled 
		(negative and 4 prints)

FX 448-2-53	Vansteenskiste scutcher, feed end view, Mt. Angel, Oregon 
		(negative & 2 prints)
FX 449-2-53	Vansteenskiste scutcher, side view, Mt. Angel, Oregon 
		(negative and 2 prints)
FX 450-2-53	Loading flax in storage shed, Mt. Angel, Oregon (negative 
		and print)

FX 451-2-53	Flemish mill scutching at Santiam Mill (negative and 2 prints)
FX 452-2-53	Flemish mill scutching at Santiam Mill (negative and 5 prints)
FX 453-2-53	Flemish mill at Santiam Flax Growers Plant, Jefferson, 
		Oregon (negative and 3 prints)

FX 454-12-53	Puller belts for self-propelled puller (negative and 3 prints)

FX 455-12-53	Bundle elevator, conveyor, and telescopic chute from 
		deseeder to retting tank, Santiam Flax Plant (negative and 3 prints)
FX 456-12-53	Deseeder, elevator, conveyor, and chute into retting 
		tanks, Santiam Flax Plant (negative and print)
FX 457-12-53	Bundle elevator, conveyor, and telescopic chute into 
		retting tanks, Santiam Flax Plant (negative and 2 prints)

FX 458-12-53	Squeeze rolls and feed end of retted straw dryer 
		(negative and 5 prints)
FX 459-12-53	Feed end of retted straw dryer with squeeze rolls showing 
		(steam) (negative and 2 prints)
FX 460-12-53	Feed end of retted straw dryer with squeeze rolls showing 
		(negative and print)
FX 461-12-53	Feed end of retted straw dryer, side view (negative and 2 
		prints)
FX 462-12-53	Take off end of retted straw dryer, side view (negative 
		and print)
FX 463-12-53	Take off end of retted straw dryer (negative and 2 prints)
FX 464-12-53	Retted straw dryer (negative and 4 prints)
FX 465-12-53	Control instrument, retted straw dryer (negative)
FX 466-12-53	Hot air supply fans and damper controls on retted straw 
		dryer (negative and 2 prints)
FX 467-12-53	Furnace, oil burner, and stack damper for retted straw 
		dryer (negative & 2 prints)
FX 468-12-53	Furnace, oil burner, and automatic control for retted 
		straw dryer (negative & print)
FX 469-12-53	Furnace and oil burner for retted straw dryer, angle view 
		(negative and 3 prints)

FX 470-3-53	String cutter, outlet end view (negative and 2 prints)
FX 471-3-53	Retted straw spreader at outlet of straw straightner 
		(negative and print)

FX 472-1-54	Retted flax dryer building, Santiam Flax Plant (negative 
		and 3 prints)
FX 473-1-54	Switch board for retted straw dryer, Santiam Flax Plant 
		(negative and 3 prints)

FX 474-1-54	Potentiometer Pyrometer in dryer laboratory (negative and 
		3 prints)
FX 475-1-54	Drawing fiber flax machinery (negative and 4 prints)

FX 476-2-54	Furnace hood, retted flax dryer (negative and 3 prints)
FX 477-2-54	Fiber flax field binder and loader (negative and 2 prints)

FX 478-2-54	Demonstration scutcher with Van Hauwaert blades and 
		gripping device (negative and 2 prints)
FX 479-2-54	Demonstration scutcher with Van Hauwaert blades and 
		gripping device, angle view (negative and 3 prints)
FX 480-2-54	Demonstration scutcher with Vansteenskiste blades and 
		gripping device (negative and 2 prints)
FX 481-2-54	Demonstration scutcher with USDA experimental blades and 
		gripping device (negative and 2 prints)

FX 482-2-54	Experimental self-propelled puller, front view (negative 
		and 2 prints)
FX 483-2-54	Experimental self-propelled puller, rear view (negative 
		and 4 prints)
FX 484-2-54	Experimental self-propelled puller, binder side view 
		(negative and 3 prints)
FX 485-2-54	Experimental self-propelled puller, auxiliary engine side 
		view (negative and 3 prints)

FX 486-5-54	Diagrammatic drawing of experimental flax drier (negative 
		and print)
FX 487-9-54	Self-propelled puller shear and belt arrangement 
		(drawing) (negative and print)
FX 488-9-54	Self-propelled flax puller schematic drive (drawing) 
		(negative and print)
FX 489-9-54	Straw divider on double needle binder (drawing) (negative 
		and print)
FX 490-9-54	Commercial type scutcher gripping devices (drawing) 
		(negative and 2 prints)

FX 491-11-54	Setting up wigwams of flax in the drying field (photo by 
		Delano Studio, Portland, #9533A; print)
FX 492-11-54	Rebinding bundles of flax in the drying field (photo by 
		Delano Studio, Portland,  #9533-1; 3 prints)
FX 493-11-54	Loading tied bundles of flax in the drying field (photo 
		by Delano Studio, Portland, #9533-2; 2 prints)

FX 494-11-54	Van Hauwaert scutching machine, take off end, Washington 
		County Flax Plant (photo by Delano Studio, Portland, #9528-A; 4 prints)

FX 495-11-55	Flax straw temperatures during drying (chart) (4x5 
		negative and 3 prints)
FX 496-11-55	Moisture content of retted flax straw during drying 
		(chart) (4x5 negative and 3 prints)
FX 497-11-55	Flax drier heat supply and air circulation (schematic 
		sketch) (negative and print)
FX 498-11-55	Overall efficiency vs. evaporation rate in a direct-heat 
		flax drier (chart) (4x5 negative and 3 prints)
FX 499-12-55	Plot of the relationship of fiber yield and seasoning of 
		retted straw (chart) (4x5 negative and 2 prints)

FX 500-1-58	Flax samples, balance, containers used in equil. moist. 
		study (negative)
FX 501-1-58	Controlled temperature-humidity cabinet, 8 sec. exposure 
		(negative)
FX 502-1-58	Controlled temperature-humidity cabinet, 0.1 sec. 
		exposure (negative & 5 prints)

FX 503-8-59	Oregon Flax Company spinning mill at Canby, Oregon (3 prints)

Unnumbered flax photographs:
	Experimental plot puller constructed in fiber flax processing shop 
		(3 views; prints only)
	Flax drier? (print only)
	Woman in office of Mt. Angel flax plant?, ca. 1940 (2 views; prints only)
	Flax looms?, ca. 1940 (print only)
	Priest at table (with linen placemats?), ca. 1940 (print only)
	Woman modeling dress (made from linen?), ca. 1950 (4x5 negative and print)
	Flax mill? (negative and print)
	Unidentified machinery (8 views: print only for 1; negatives only 
		for 2; negatives and prints for 5)
	Part of an eighty acre field with retted flax straw set up and 
		wigwamed for drying and bleaching (4x5 copy negative of image 
		from Oregon Magazine)
	Drawing of a person hackling flax (print only)
	
Ilustrations proposed for use in Station Bulletin 531, 1953

Scutcher bulletin illustrations  drawings of pre-industrial flax 
  breaking, beating and scraping, scutching; drawings of modern scutching 
  machinery (negatives and prints)


Photographs PageReturn to Photographs Page